Electrical Protection Trainer
Model Number: GOTT-EPT-146
Description : This Electrical Protection Trainer have been created for learning of Dangers caused of touch of the electrical or electrical conductor equipment, Leakage current, Simulation of protection of leakage current by using FI circuit breaker, Prevention of “Fault” by using separation transformer. It’s designed as panel system with 2 level mounting frame. There have clearly symbol on each panel by silk screen. All of connecting point via safety connector for safety in operation.
Electrical Machine Trainer
Model Number: GOTT-EMT-1543
The Standard Lab has been designed for
experiments and testing in Electrical Machines in education.
The machines are basically industrial models, self protect kind,
with coupling half joint, especially equipped to be suitable for
students training in laboratory.
For this purpose the winding ends are connected to 4 mm safety socket in a metal housing on top of which a clear synoptic diagram is engraved as an educational terminal board.
8051 Microcontroller Trainer
Model Number: GOTT-MCT-STC8051
Description : With USB, RS232 serial, PS / 2 variety of communication interfaces, programming, simulation, experimental boards, ISP download cable. Just a USB data cable, you can get all of the power supply, communication, program recording, simulation and other functions. MCU I / O interfaces and external resources to fully open, the unprecedented freedom and flexibility, free from the shackles of any hardware that can dig down to the microcontroller for each foot. Development board has all the features of the others (including the 4 AD and 1 DA) with an open circuit schematic and MODBUS protocol communication.
80386 Microprocessor Trainer
Model Number: GOTT-MCT-80386
Description :The 80386 Microprocessor Trainer 32-bit embedded microcomputer teaching experimental system is first close to the practical application of teaching platform based on I386EX for microprocessor embedded controller as the core module.
Contains 24M Intel386EX high-performance 32-bit microprocessor (industrial grade); 640K conventional memory; 1MB high memory; 512K bytes Flash memory, with a disk file driver software interface; support electronic disk DOC2000 series chip direct replacement 512Kflash, highlighting the large-capacity data storage; streamline the expansion bus, with most of the peripheral interface control device is directly connected to real-time clock; eight general-purpose digital I / O (GPIO); PC-compatible CMOS power-off protection.
Sequence Switch & Indicator unit PLC Simulator Trainer – Computer
Model Number: GOTT-SWIP-733
Description: Modular type using actual industrial component. Arranges the materials to be used for contact sequence on the board. As symbol of each element is graphic on the panel, it is easy to understand. Can be used as PLC Trainer Application Circuit.
Basic PLC Trainer OMRON CP1E
Model Number: GOTT-PLC-CP1E
Description: GOTT Basic PLC Trainer Is a complete training system, introducing the student to the operation, programming and troubleshooting of modern industrial programmable logic controllers. A complete curriculum is provided incorporating many learning activities related to basic sequence, circuit flow, ladder logic programming and trouble shooting. Many activities reflect realistic industrial applications. This product, together with its associated student manual and programming manual, creates a complete introductory course in PLCs, for industrial training applications as well as in the educational learning.
Pneumatics & Electro-Pneumatics Trainer
Model Number: GOTT-PNE-EPNE
Description: The Pneumatic Trainer may be supplied on a working table or as a tabletop unit. In addition, it may be equipped with an integral power supply and compressor for use in locations that are not rigged for plant air. This affordable, yet in-depth, training system can improve skills and increase knowledge within industrial training programs or within the educational setting. This integrated hands-on training aid introduces students to basic principles of pneumatics and compressed air devices. This unit allows for the bread-boarding of numerous pneumatic circuits to illustrate a wide selection of pneumatic circuits along with the associated lab manual and instructor guide. This creates a learning experience that provides a complete and practical introduction to pneumatic technology.
Hydraulics/Electro-Hydraulic Training Set
Model Number: GOTT-HYD-EHYD
Description: The construction set electro-hydraulic is design appropriate for training in electro – hydraulic control technology. With this construction set the student get to know the basic and advanced circuits of electrohydraulic original industrial elements NG6 / CETOP 03 / NFPA D03 on adapter plates.
PLC Training Set
Model Number: GOTT-PLCMODULE-07
Description: This PLC equipment is great for PLC programing training as we designed the PLC Trainers using actual PLC and provide ladder logic examples.
Mobile Phone Trainer
Model Number: GOTT-HP-1
Measurement of test point voltages.
Observation of test point Waveforms.
A detailed manual containing different practical are provided with the board.
CCTV Security System Training Kit
Model Number: GOTT-CCTV-SECURITY
Description: GOTT CCTV Security System Training Kit provides courses and hands-on experiments to installers, operators, managers and designers of Closed Circuit Television (CCTV), alarm, access control and all other types of electronic security systems. Courses are available to meet the training requirements of student and security personnel at all levels. Foundation courses for those with little or no previous experience.
Split Air Conditioner Trainer
Model Number: GOTT-SACT-20
Description: The Split Air Conditioner Trainer has been designed to explain and demonstrate the working principles of an air-conditioning system. It is mounted in an enamel-coated steel frame angle. All the components which are used in GOTT-SACT-20 are original air-conditioning components by Industrial standard manufacturers. The basic system comprises a compressor, condenser (divided into two sections), expansion device, digital temperature indicator with three PT 100 sensors (measuring condenser, evaporator and cabinet temperature), dryer unit, sight glass, and three pressure / suction gauges.
LCD Color TV Trainer
Model Number: GOTT-TV-02
The GOTT-TV-02 is an ideal piece of training equipment to teach the operation of color TV receivers, which allows the student to familiarize himself with the most advanced technological innovations. The tutor includes a fault generation module and a trainer for the I2 C Communications Bus. The block diagrams of the GOTT-TV-02 intuitively show the different modules which make up the color TV receiver. Its large number of test points allows the analysis and monitoring of the electric signals in the different functional blocks of the receiver. It is safe to operate since all the test points are protected against possible accidental short-circuits. Using the fault module it is possible to simulate the most common faults which can occur in the receiver with thus establishing methods of diagnosis and tracing. The trainer moreover incorporates a microcontroller which makes it possible to carry out practices related to the operation of the I2C communications BUS. Special attention has been paid to its design, obtaining a small-sized functional piece of equipment. Moreover, in its rest position, it can be used as a domestic desktop TV.
AM-FM TRAINING SYSTEM
Model Number: GOTT-AMFM-RADIO-02
The GOTT-AMFM-RADIO-02 has been designed from a Stereo Radio Tuner equipped with the most advanced reception circuits. Each one of the functional sections has several test points which permit the analysis and monitoring of the main electrical signals of the turner. All the test points are protected against accidental shorting.
PC Fundamentals Trainer
Model Number: GOTT–PC–BASIC-934
Description: PC Fundamentals Trainer is designed to develop the technical skills measured by the new personal computer certification exam. It is designed to fill a semester. There are 60 plus-hands-on exercises take a student through the construction, upgrading, troubleshooting, and repairing of common problems that will happen on computer. As well as a series of windows “bugs” were created in a range of levels is guaranteed to challenge each student at an appropriate level.
Digital Logic Lab Trainer – 16bits
Model Number: GOTT–DLT–3016A
Description: Digital Logic Lab Trainer is an ideal training kit for high schools, technical institution, and universities. It consists of SolderlessBreadboard, Power Supply, Pulse Generator, Pulse Switches, Mode Selector Switch, Seven Segment Display,16-Bit LED Display ,16-BitData Switches & Digital Probe. It allows the users to perform most digital experiment without the use of additional equipment.
Hard Disk Drive Trainer
Model Number: GOTT–HDD–TRA
Description: The GOTT HARD DISK DRIVE TRAINER is designed to instruct service technicians in the operation, theory, servicing, problem diagnosis and repair of the keydevices and components used in Information Technology. The trainer is based upon computers and components which have been modified to facilitate training and have a special electronic fault insertion system. The unit consists of one drive that shows all key internal components and functions.
Internet of Things (IoT) Training Kit
Model Number: GOTT–IoT–5087
Description: Industries are entering a new era as the IoT provides devices worldwide containing embedded technology with seamless connection, management, and secure interaction. Industrial IoT (IIOT) describes machine-to-machine (M2M) communications wherein machines interact and communicate with other machines, objects, environments and infrastructures. As a result of these communications, huge volumes of data are intelligently generated, with the data processed and analyzed, resulting in meaningful and timely action for management and control. The increasing trend towards Industrial IoT is transforming industries, increasing efficiency and optimizing operations.ADLINK uses the robust hardware and software stack of Intel® Gateway Solutions for the Internet of Things to empower industries with connection of legacy infrastructure. Accordingly, companies can collect and analyze data to enable greater operational efficiency, big data solutions, and new services for business transformation.
Laptop Troubleshooting Trainer
Model Number: GOTT–LAP-TRO-TRA
Description: The GOTT LAPTOP TROUBLESHOOTING TRAINER is designed to instruct service technicians in the operation, theory, servicing, problem diagnosis and repair of the key devices and components used in Information Technology. The trainer is based upon computers and components which have been modified to facilitate training and have a special electronic fault insertion system. The unitconsists of one drive that shows all key internal components and functions.
Analog Communication Trainer
Model Number: GOTT–ACT–9329
Description: Design and implementation of RF oscillators and filters. Design and implementation of analog AM and FM modulation and demodulation. Design and implementation of digital and analog converter. Design and implementation of ASK and FSK modulation and demodulation. Design and implementation of PSK and QPSK modulation and demodulation.
Digital Communication Trainer
Model Number: GOTT–DCT–9329
Description: Design and implementation of ASK, FSK and PSK modulators and demodulators. Design and implementation of DM and ADM modulators and demodulators. Design and Implementation of PWM and PCM modulators
Optical Fiber Communication Trainer
Model Number: GOTT–OFC–334
Description: Textbook includes the theoretical and practical details . Textbook includes the expected results for reference. Problem discussion attached together with answers for instructor. Only need oscilloscope and spectrum analyzer to obtain the measure results.
Microwave Active Circuit Design Trainer
Model Number: GOTT-MAC-157
Description: Design and implementation of microwave front end receiver module. Design and implementation of microwave front end transmitter module. Design and implementation of voltage controlled oscillator and phase locked loop. Design and implementation of IQ modulator and demodulator. Design and implementation of digital wireless transceiver module.
Model Number: GOTT-ATS-3200
Description: GOTT-ATS-3200 Antenna Training System is including the transmission mode and augmented antenna. And according to the different types of operation there is different antenna. RF signal generator controls the direction of the antenna and provide 500MHz, 2GHz, 10GHz RF signal. This antenna is used for satellite reception; it is used more for practical training. The quantity and distance of Dipole and anode is under control. You can gain characteristics and the right direction for independent design. Since the Antenna Training System using higher-frequency, it is possible to do experiments of the propagation velocity in the narrow band, and it is also make the relocation and safekeeping much easier. Especially, after the radio transponder transmitting and receiving antenna appeared.
MODERN DIGITAL MULTIMETER
Model Number: GOTT-DT9205A
Description: The GOTT-DT9205A is one of the most common items of test equipment used in the electronics industry today.While there are many other items of test equipment that are available, the GOTT-DT9205A is able to provide excellent readings of the basic measurements of amps, volts and ohms.In addition to this the fact that these modern digital multimeter use digital and logic technology, means that the use of integrated circuits rather than analogue techniques, enables many new test features to be embedded in the design.
Digital Storage Oscilloscope
Model Number: GOTT-DSO 1000 SERIES
Description: 500MSa/s & 1GSa/s Sampling Rate 2 Channels 7” Widescreen LCD Color Display (ADS1022C: 5.7 in) USB Host/Device: Support USB Printer and USB Flash Drive PictBridge Function Easy scope Software Industrial Power Design, Troubleshooting, Installation, and Maintenance. Electronics Design, Troubleshooting, Installation, and Maintenance Circuit Design & Debug
Bench Type Digital Multimeter
Model Number: GOTT-BENCHDMM-677A
Description: DC/AC Voltage, DC/AC current, resistors, Diode 6 functions Resolution : 10mV, 10mA,10mW USB Host/Device: Support USB Printer and USB Flash Drive All measure range has protected circuit. 0.03% DCV accuracy AC true RMS or AC+DC true RMS
Model Number: GOTT-BENCHDMM-677A
Description: A frequency counter is an electronic instrument, or component of one, that is used for measuring frequency. Frequency is defined as the number of events of a particular sort occurring in a set period of time. Frequency counters usually measure the number of oscillations or pulses per second in a repetitive electronic signal. Most frequency counters work by using a [counter] which accumulates the number of events occurring within a specific period of time.
DUAL OUT DC POWER SUPPLY
Model Number: GOTT-PS-1300MQ/1303DN
Description: Overload and reverse polarity protection Output on / off function Fixed output DC 5V/1A Constant voltage and constant current Low Ripple & noise 0.01% High Regulation Min output current setting 4Ma
AUTOMOTIVE SENSOR EDUCATIONAL SYSTEM
Model Number: GOTT-ASES-1
Description: Trainer equipment with autotronics digital and analogue sensor kit and training manual including training for personal.The trainer consist:Oxygen sensor, knock sensor, water temperature sensor, intake air temperature sensor, reverse sensor, and photo sensor system.
GOTT SERIES –COMPUTER BASED TRAINING SYSTEM (CBT)–MAIN MODULE
Model Number: GOTT-CBT-MAIN
Description: The GOTT -Computer Based Training System (CBT) is an educational software application designed for providing a visually animated explanation of course syllabuses to students or participants with audio assistant in vocabulary pronunciation; instead of the traditional text based explanation. Besides that, this GOTT -CBT is also built with student and course management environment where the lecturers are able to monitor and organize the students’ performance in evaluation tests and examinations in paperless mode. Moreover, it is capable to help user to be familiar with computer based realm to against the techno stress as well as can eliminate the flavor some matter in examination papers marking.PLATFORMS :(1)Stand -Alone version which stores records in MS Access database.(2)Network Based version which stores records in MySQL database.